Recreating hull surface from 100 years old drawing and offset table is like archeology.
![](https://static.wixstatic.com/media/90f2de_cf591d8e9a974cbc8f49b3875006ab09~mv2.jpg/v1/fill/w_147,h_100,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_cf591d8e9a974cbc8f49b3875006ab09~mv2.jpg)
I once did the hull lines from a hundred years old drawings. I had to refresh how to recalculate the coordinates of feet’s – inches -eighths and manually input offset table. There were no original drawings. There were only pictures of them. Once again, I was amazed by the quality of the old drawings. When smoothing the lines of the hull, the surface went to the original points easily. And, in the end, I made well-faired hull for production
![](https://static.wixstatic.com/media/90f2de_a4f7526b73364ab3a526bfe679ea377c~mv2_d_1600_1200_s_2.jpg/v1/fill/w_147,h_110,al_c,q_80,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_a4f7526b73364ab3a526bfe679ea377c~mv2_d_1600_1200_s_2.jpg)
![](https://static.wixstatic.com/media/90f2de_dc7a8cced43042d98140962808ff18ca~mv2.png/v1/fill/w_87,h_73,al_c,q_85,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_dc7a8cced43042d98140962808ff18ca~mv2.png)
![](https://static.wixstatic.com/media/90f2de_4977ad459d8f485bbef575ac5a2f8d74~mv2.png/v1/fill/w_49,h_20,al_c,q_85,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_4977ad459d8f485bbef575ac5a2f8d74~mv2.png)
![](https://static.wixstatic.com/media/90f2de_7940723a081f434da362a2136b90b4df~mv2.png/v1/fill/w_49,h_18,al_c,q_85,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_7940723a081f434da362a2136b90b4df~mv2.png)
![](https://static.wixstatic.com/media/90f2de_2d3e34e059ff40a7843506b0024bd07c~mv2.png/v1/fill/w_49,h_25,al_c,q_85,usm_0.66_1.00_0.01,blur_2,enc_auto/90f2de_2d3e34e059ff40a7843506b0024bd07c~mv2.png)